-
Corro OLD FOGEY (bigger)
This is my version of the OLD FOGEY, 33% larger than FT foam original. It’s made of Correx 2mm, exept red horizontal stab- its from 3 mm. Wing has a modified profile – a curve, not angular. Bamboo reinforcement in center wing (5 mm stick for orchid flowers), and some inside front of…
-
Cessna Citation CJ1 2200mm – 86″ Радіокерована модель
Now I will build this giant Cessna Citation CJ1 RC plane. I will use 6mm foam board or Depron foam for the material and will test it with pusher prop configuration and also ducted fan (EDF) for more scale look, and also will try 3d printed retract landing gear for the first time. The reason…
-
Tigermoth 1200mm Biplane RC Plane
This time I’m back to basic by using all foam board material with some plywood parts. This De Havilland Tigermoth biplane RC plane is designed to have the same scale as PT-17 Stearman. While Stearman wingspan is 1300mm this Tigermoth wingspan is 1200mm. Smaller but still can do short take off. Using 3536 1200kv brushless…
-
DHC-2 Beaver RC Plane with 3D Printed Parts and Foamboard plans
This DIY Beaver model RC plane was built solely as a test bed for a brushless motor, esc and prop that sponsored by T-motor. This model is also an experiment to build an RC plane using 2 different materials together, which are 3D printed parts and depron foam or foam board. I am still learning…
-
F/A-18F Super Hornet 1000mm RC Plane
Yet another Fighter jet, this time is F/A-18F the 2 seated Super Hornet, the wingspan is about 1 meter plus, with the flying weight about 1700 gram. It’s still using the same EDF as my previous jet, which is 70mm 12 blades FMS EDF. I use 6S battery by connecting two 3S 2200mAh Lipo batteries…
-
C-130 Hercules 3000mm RC Plane
This is the biggest RC model plane that I ever build and fly. The wingspan is 3000mm or almost 10ft. Use almost entirely 5mm foam board as the build material. In this video also the first time I made propeller spinners with 3D printer, and make foam wheels and firewall with laser cutter. I use…
-
F-22 Raptor RC Plane Plans
Page 1 of 3 Because our last big size Su-30 went so good, we made another big size jet again, this time is F-22 Raptor. With slightly smaller wingspan but with the higher wing area compare to my Su-30. Also with the lighter weight, only about 1 kg, make it even smaller wing loading. It…
-
Cessna L-19 Bird Dog RC Plane Plans
All started with my friend Hendi, he wanted to build a huge scale of my Piper J Cub plans, 2 meters in wingspan, and then I offered him to build my new RC model design, although I haven’t got it ready yet but he agreed, so I made the Cessna L-19 Bird Dog in just…
-
PBY-5 Catalina RC Plane (Flying Boat)
Introducing my latest seaplane model, the PBY Catalina RC Plane! This versatile plane is designed to take off and land on both land and water, thanks to its detachable landing gear. While it may require some additional work to switch between land and water modes, it will fly beautifully either way due to its glider-like…
-
Cartoon A6M Zero RC Plane
This Cartoon A6M Zero RC plane is a continuation of cartoon rc plane series after F4U Corsair. Unlike the Corsair model I will not post the build video on Babyplane channel anymore, from now on I will put future cartoon models on Julius Perdana channel. The cartoon series is a collaboration between my friend Hendi…
+38 (068) 460 23 73
